restore windows 10 to different hardware with acronis true image 2015

You must return the mode to AHCI before starting Windows.

If the rescue media does not recognize the SSD and the SSD controller mode is AHCI, you can try to change the mode to IDE (or ATA in some BIOS brands) and see whether this solves the problem.Īttention: do not start Windows after changing the mode it may result in serious system problems.

If the screen shows your SSD, just click Cancel.

Use this for checking whether the SSD is detected in the recovery environment.

Select Tools & Utilities -> Add New Disk in the main menu and the Disk selection screen will show the information about all hard disks in your system.

The next step is to check whether your Acronis bootable rescue media recognizes the SSD. When creating a partition, check that the free space before partition is 1 MB. If it detects the SSD, use the Add new disk tool to create a single partition on the disk occupying the entire disk space. Start Acronis True Image 2015 and check whether it detects the SSD. Use its size as the reference.Ĭlean //this operation removes all information from the SSD and overwrites the MBR with the default one. The screen will show the disks connected to your computer. For Windows XP, type cmd in the Run field and press Enter. If the BIOS of your computer does show the SSD, you can try the following procedure:įor Windows Vista/Windows 7 type cmd in the Search field and press Enter.

If these suggestions do not help, contact the support of your SSD manufacturer. You may also try to update the BIOS and SATA drivers. If the BIOS of your computer does not show the SSD, verify that the power and data cables are properly connected.

In such a case, check whether the SSD is recognized in BIOS. Sometimes Acronis True Image 2015 may not recognize an SSD. To totally unlock this section you need to Log-in

Restore windows 10 to different hardware with acronis true image 2015